1980 Chevrolet Impala Wagon Base
Unverified
All photo credits
- Photo: Chevrolet Impala Station, Belgian photo5 by Alfvanbeem, CC0, via Wikimedia Commons
- Photo: Chevy or Ford? (4927751733) by dave_7 from Lethbridge, Canada, CC BY 2.0, via Wikimedia Commons
The 1980 Chevrolet Impala Wagon Base is a 115-hp 4.4-liter V8 wagon with a 3-speed automatic and rear-wheel drive.
It makes 115 horsepower at 4,000 rpm and 199 lb-ft of torque at 2400 rpm.
The Impala Wagon measures 215.1 inches long on a 116.0-inch wheelbase and has a curb weight of 4,023 lb.
| Spec | Value |
|---|---|
| Vehicle | |
| Body Type | Wagon |
| Powertrain | Gas |
| Engine | |
| Engine Type | 4.4L Small-Block V8 (Chevrolet 267) |
| Displacement | 4.4 L |
| Horsepower | 115 hp @ 4,000 rpm |
| Torque | 199 lb-ft @ 2400 rpm |
| Bore and Stroke | 88.9 x 88.4 mm (3.5 x 3.48 in) |
| Injection Type | Carburetor |
| Drivetrain | |
| Drive Type | RWD |
| Transmission | |
| Transmission | 3-speed Automatic |
| Fuel Economy | |
| Tank Capacity | 21.9 gal |
| Brakes | |
| Front Brake Disc | Discs |
| Rear Brake Disc | Drums |
| Tires & Wheels | |
| Tires Front | 225/75 R15 |
| Tires Rear | 225/75 R15 |
| Dimensions & Weight | |
| Length | 215.12 in |
| Width | 79.29 in |
| Height | 57.09 in |
| Wheelbase | 115.98 in |
| Curb Weight | 4,023 lbs |
Similar cars
Rivals to the 1980 Chevrolet Impala Wagon Base with similar size, power and price from around the same years.
Safety & Recalls
NCAP safety ratings
Not crash-tested by NHTSA for this model year.
Recalls
3 recalls on file with NHTSA for the 1980 Chevrolet IMPALA. Not every recall applies to every trim or VIN — check yours at nhtsa.gov/recalls.
Aug 19, 1983 · VEHICLE SPEED CONTROL:CABLES
ACCELERATOR PUMP LEVER RETAINING PIN MAY LOOSEN AFTER REPEATED HEAVY ACCELERATOR PEDAL APPLICATIONS. THIS COULD CAUSE THE THROTTLE TO BECOME STUCK IN THE OPEN POSITION.
Remedy: DEALER WILL INSTALL A SPECIAL COTTER PIN, TO RETAIN THE ACCELERATOR PUMP PIN, AND A SPRING CLIP THRUST WASHER ON THE ACCELERATOR PUMP LINK.
NHTSA campaign 83V077000
Oct 15, 1980 · SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS
THE INVOLVED VEHICLES MAY HAVE INSUFFICIENT CLEARANCE BETWEEN THE FRONT BRAKE PIPE AND THE ENGINE OIL PAN. THIS CONDITION COULD CAUSE THE BRAKE PIPE TO CONTACT THE LEFT HAND FRONT EDGE OF THE OIL PAN, RESULTING IN WEAR AND, EVENTUALLY, DAMAGE TO THE BRAKE PIPE. THIS COULD LEAD TO A LOSS OF BRAKE FLUID AND SUBSEQUENT LOSS OF BRAKES.
Remedy: DEALER WILL REPLACE THE BRAKE PIPE, IF NECESSARY, FREE OF CHARGE.
NHTSA campaign 80V135000
Oct 14, 1980 · EQUIPMENT:OTHER:LABELS
VEHICLES MAY NOT CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 110, "TIRE SELECTION AND RIMS". THE TIRE RIM SIZE WAS OMITTED ON THE EXISTING LABEL.
Remedy: THE OWNER HAS THE OPTION OF AFFIXING THE CORRECT INFORMATION LABEL HIM/HERSELF OR HAVING THE DEALER DO IT AT NO CHARGE TO OWNER.
NHTSA campaign 80V132000
Source: US National Highway Traffic Safety Administration (nhtsa.gov), matched as 1980 CHEVROLET IMPALA. US-market vehicles only; data cached for up to 7 days.