← Back to Search

1988 Mitsubishi Mirage Sedan 3AT

The 1988 Mitsubishi Mirage Sedan 3AT is a 68-hp 1.5-liter inline-4 sedan with a 3-speed automatic and front-wheel drive. It starts at $8,844 MSRP and is rated at 27 mpg combined.

It makes 68 horsepower at 5,500 rpm and 82 lb-ft of torque at 3500 rpm. EPA fuel-economy estimates are 25 mpg city and 29 mpg highway (27 mpg combined).

The Mirage measures 169.0 inches long on a 93.7-inch wheelbase and has a curb weight of 2,095 lb.

Spec Value
Vehicle
Body TypeSedan
PowertrainGas
Price
MSRP$8,844 ($24,297 *)
Engine
Engine Type1.5 L SOHC inline-4, naturally aspirated (Orion 4G15 family)
Displacement1.5 L
Horsepower68 hp @ 5,500 rpm
Torque82 lb-ft @ 3500 rpm
ValvetrainSOHC, 2 valves per cylinder (8 valves)
Bore and Stroke75.5 x 82
Drivetrain
Drive TypeFWD
Transmission
Transmission3-speed automatic
Fuel Economy
City25 MPG
Highway29 MPG
Combined27 MPG
Recommended FuelRegular unleaded gasoline
Dimensions & Weight
Length169 in
Width64 in
Height53 in
Wheelbase93.7 in
Cargo Volume11 ft³
Curb Weight2,095 lbs
* Amount adjusted for inflation to 2026 dollars

Safety & Recalls

NCAP safety ratings

Not crash-tested by NHTSA for this model year.

Recalls

1 recall on file with NHTSA for the 1988 Mitsubishi MIRAGE. Not every recall applies to every trim or VIN — check yours at nhtsa.gov/recalls.

May 24, 1995 · SEAT BELTS:FRONT:BUCKLE ASSEMBLY

THE FRONT SAFETY BELT BUCKLE RELEASE BUTTONS CAN BREAK. THESE RED PLASTIC RELEASE BUTTONS ARE MARKED "PRESS." IF A BUTTON BREAKS, PIECES CAN FALL INTO THE BUCKLE ASSEMBLY CAUSING THE BUCKLE TO OPERATE IMPROPERLY.

Consequence: THE SAFETY BELTS WOULD NOT PROVIDE ADEQUATE PROTECTION TO AN OCCUPANT IN A VEHICLE CRASH.

Remedy: OWNERS SHOULD PROMPTLY CHECK THE CONDITION AND OPERATION OF BOTH FRONT SAFETY BELT BUCKLES AND CAREFULLY INSPECT THE RED RELEASE BUTTON FOR ANY BREAKS OR CRACKS. THEY SHOULD ENSURE THAT BOTH BUCKLES ARE OPERATING PROPERLY BY INSERTING EACH LATCH PLATE INTO ITS BUCKLE, TUGGING ON THE BELT TO MAKE SURE THE LATCH IS SECURELY LOCKED, AND THEN PRESSING THE RELEASE BUTTON. THE LATCH PLATE SHOULD POP OUT OF THE BUCKLE WHEN THE BUTTON IS PRESSED. IF EITHER RELEASE BUTTON SHOWS A SIGN OF BREAKING OR CRACKING OR IF EITHER BUCKLE FAILS TO OPERATE PROPERLY, OWNERS SHOULD PROMPTLY CONTACT THEIR AUTHORIZED DEALER TO SCHEDULE AN APPOINTMENT TO HAVE THE BUCKLE REPLACED OR REPAIRED, FREE OF CHARGE. THE MANUFACTURER IS DEVELOPING A REMEDY DESIGNED TO PREVENT FAILURE OF THE BUTTONS THAT ARE NOT CURRENTLY BROKEN.

NHTSA campaign 95V103004

8 owner complaints to NHTSA for the 1988 Mitsubishi MIRAGE

Owner Complaints

8 owner complaints filed with NHTSA for the 1988 Mitsubishi MIRAGE (1 mention a crash, 4 a fire, 1 an injury). See all on nhtsa.gov

Most-cited areas
Engine And Engine Cooling3
Seat Belts3
Air1
Latches/Locks/Linkages1
Service Brakes1
A complaint can cite more than one area.
Most recent complaints
Mar 27, 2003 · Engine And Engine Cooling Fire
“THE VEHICLE CAUGHT ON FIRE IN THE ENGINE COMPARTMENT. *NLM *NLM”
Oct 17, 2002 · Engine And Engine Cooling Fire
“CONSUMER STATED THAT ENGINE CAUGHT ON FIRE. *YH”
Sep 28, 2001 · Latches/Locks/Linkages
“HOOD LATCH IS IS A ROUND PROTRUSTION THAT FITS INTO HOLE ON BODY OF CAR. ROUND PROTRUSION IS HELD IN PLACE BY SMALL FLAT SIDED PIECE OF METAL THAT SLIDES BACK AND FORTH INSTEAD OF BY POSITIVE CLAMPING…”
Dec 30, 1996 · Service Brakes, Air Fire
“POSSIBLE SECONDARY AIR SUPPLY REED VALVES FAILURE ,PER RECALL NOTICE, RESULTED IN VEHICLE FIRE, NOTICE NOT RECIEVED.”
Jul 30, 1996 · Engine And Engine Cooling Fire
“ENGINE FIRE. *DH”

Complaints are unverified reports submitted to NHTSA by owners. They cover the whole model year, not a specific trim, and a count alone doesn't show how common a problem is.

Source: US National Highway Traffic Safety Administration (nhtsa.gov), matched as 1988 MITSUBISHI MIRAGE. US-market vehicles only; data cached for up to 7 days.

← Back to Search