1991 Mazda 929 S Sedan
All photo credits
- Photo: Mazda 929 3.0i Royal Classic Hardtop HC by Mr.choppers, CC BY-SA 3.0, via Wikimedia Commons
- Photo: Mazda 929 arriving Schaffen-Diest 2018 by Charles01, CC BY-SA 4.0, via Wikimedia Commons
- Photo: Mazda 929 (10488781396) by FotoSleuth, CC BY 2.0, via Wikimedia Commons
- Photo: Mazda 929 (10488960623) by FotoSleuth, CC BY 2.0, via Wikimedia Commons
- Photo: Mazda 929 3.0i Royal Classic Hardtop by Mr.choppers, CC BY-SA 3.0, via Wikimedia Commons
The 1991 Mazda 929 S Sedan is a 158-hp 3.0-liter V6 sedan with a 4-speed automatic and rear-wheel drive. It starts at $25,299 MSRP and is rated at 18 mpg combined.
It makes 158 horsepower and 170 lb-ft of torque. EPA fuel-economy estimates are 16 mpg city and 22 mpg highway (18 mpg combined).
The 929 measures 193.0 inches long on a 106.6-inch wheelbase and has a curb weight of 3,272 lb.
| Spec | Value |
|---|---|
| Vehicle | |
| Body Type | Sedan |
| Powertrain | Gas |
| Price | |
| MSRP | $25,299 ($60,368 *) |
| Engine | |
| Engine Type | 3.0L SOHC 18-valve V6 |
| Displacement | 3 L |
| Horsepower | 158 hp |
| Torque | 170 lb-ft |
| Valvetrain | SOHC, 3 valves per cylinder |
| Injection Type | Electronic fuel injection |
| Drivetrain | |
| Drive Type | RWD |
| Transmission | |
| Transmission | 4-speed automatic |
| Fuel Economy | |
| City | 16 MPG |
| Highway | 22 MPG |
| Combined | 18 MPG |
| Recommended Fuel | Regular |
| Dimensions & Weight | |
| Length | 193 in |
| Width | 66 in |
| Height | 54 in |
| Wheelbase | 106.6 in |
| Curb Weight | 3,272 lbs |
| Interior | |
| Headroom Front | 38 in |
| Headroom Rear | 38 in |
| Legroom Front | 43 in |
| Legroom Rear | 36 in |
Similar cars
Rivals to the 1991 Mazda 929 S Sedan with similar size, power and price from around the same years.
Safety & Recalls
NCAP safety ratings
Not crash-tested by NHTSA for this model year.
Recalls
1 recall on file with NHTSA for the 1991 Mazda 929. Not every recall applies to every trim or VIN — check yours at nhtsa.gov/recalls.
May 24, 1995 · SEAT BELTS:FRONT:BUCKLE ASSEMBLY
THE FRONT SAFETY BELT BUCKLE RELEASE BUTTONS CAN BREAK. THESE RED PLASTIC RELEASE BUTTONS ARE MARKED "PRESS." IF A BUTTON BREAKS, PIECES CAN FALL INTO THE BUCKLE ASSEMBLY CAUSING THE BUCKLE TO OPERATE IMPROPERLY.
Consequence: THE SAFETY BELTS WOULD NOT PROVIDE ADEQUATE PROTECTION TO AN OCCUPANT IN A VEHICLE CRASH.
Remedy: OWNERS SHOULD PROMPTLY CHECK THE CONDITION AND OPERATION OF BOTH FRONT SAFETY BELT BUCKLES AND CAREFULLY INSPECT THE RED RELEASE BUTTON FOR ANY BREAKS OR CRACKS. THEY SHOULD ENSURE THAT BOTH BUCKLES ARE OPERATING PROPERLY BY INSERTING EACH LATCH PLATE INTO ITS BUCKLE, TUGGING ON THE BELT TO MAKE SURE THE LATCH IS SECURELY LOCKED, AND THEN PRESSING THE RELEASE BUTTON. THE LATCH PLATE SHOULD POP OUT OF THE BUCKLE WHEN THE BUTTON IS PRESSED. IF EITHER RELEASE BUTTON SHOWS A SIGN OF BREAKING OR CRACKING OR IF EITHER BUCKLE FAILS TO OPERATE PROPERLY, OWNERS SHOULD PROMPTLY CONTACT THEIR AUTHORIZED DEALER TO SCHEDULE AN APPOINTMENT TO HAVE THE BUCKLE REPLACED OR REPAIRED, FREE OF CHARGE. THE MANUFACTURER IS DEVELOPING A REMEDY DESIGNED TO PREVENT FAILURE OF THE BUTTONS THAT ARE NOT CURRENTLY BROKEN.
NHTSA campaign 95V103005
18 owner complaints to NHTSA for the 1991 Mazda 929
Owner Complaints
18 owner complaints filed with NHTSA for the 1991 Mazda 929 (1 mention a crash, 1 a fire, 1 an injury). See all on nhtsa.gov
| Hydraulic | 9 |
| Service Brakes | 9 |
| Engine And Engine Cooling | 3 |
| Power Train | 3 |
| Electrical System | 1 |
| Fuel System | 1 |
Complaints are unverified reports submitted to NHTSA by owners. They cover the whole model year, not a specific trim, and a count alone doesn't show how common a problem is.
Source: US National Highway Traffic Safety Administration (nhtsa.gov), matched as 1991 MAZDA 929. US-market vehicles only; data cached for up to 7 days.